Hobbybrauer.de

McMelloW

Hat jemand bereits Erfahrung mit der neuen Firmware 6.3.1 für die iSpindel

McMelloW

Hello Stephan, Thanks for your help There is an example systemd config file called ispindle-srv.service. Of course you'll need to edit User and ExecStart to reflect your system. So User will usually be pi, ExecStart should be /usr/bin/python [path to iSpindle.py]. You should then be able to enable i...

McMelloW

Hello all,

RPi 3B+ and Buster. Anybody know how to make iSpindle.py3 run as a service? See my previous posting, is does not work any more?

All tips & Tricks re welcome

McMelloW

Dear all, On my Raspberry Pi 3B+ I upgraded to Buster. Now i can not start the iSpindle as a service. I had to remove insserv, because things are changed in Buster. But I can not get it fixed. See log below. pi@mcmellow-pi:~ $ sudo systemctl status ispindle-srv.service ? ispindle-srv.service Loaded:...

McMelloW

Sehr cool. Ich freue mich sehr, was da aus meinem "Baby" geworden ist! Das Baby wird jetzt nach Geschmack bunter... Ich habe das jetzt in die Settings eingebaut und 2 Layouts zum Test. Ich werde noch zwei weitere hinzufügen. Danach kann jeder selber kreativ werden. Mir persönlich gefällt ...

McMelloW

Ich habe mal eine Frage zur Kalibrierung direkt mit dem Server. Ich kapier es irgendwie nicht ganz. Was sind das für drei Werte die ich bei der Kalibrierung eingeben muss und woher bekomme ich die Werte? Ergeben sich die Werte aus dem Onlinetool welches bei ispindel.de verlinkt ist oder aus der Exc...

McMelloW

Hallo zusammen, mein Ispindel funktioniert leider nicht wie er sollte, jedoch finde ich den Fehler nicht. Ich hoffe, dass mir hier jemand weiterhelfen kann :-). Es liegen folgende zwei Probleme vor: 1. Im Konfigurationsmodus wird der Tilt immer mit 0° angezeigt. Beim auslesen mit Putty wird der Til...

McMelloW

Zeig uns doch mal was du hast. Ein Paar Fotos wären hilfreich, um dir Tipps zu geben. Besonders von der Platine (Vorder- und Rückseite). Ja gerne :) anbei die Vorder- und Rückseite. Besten Dank Florian Hello Florian, I hop this is of help to you. My assembled iSpindel. iSpindel-top.jpg iSpindel-bot...

McMelloW

Hello Alex,
Thanks for looking at it. I will update when you are ready with your repo.

I discovered in the Readme.md and Install.md links that are still pointing to the repo from Tozzi. Did read posting #703 in this topic.

McMelloW

Yes, I know there was an issue on https://github.com/universam1/iSpindel about it. Found Issue #96. It just ended in nothing. Can we shake it to live again, and convince Sam to pick it up again? It would be very handy to be able to change the interval val time during the fermentation. This will be ...

McMelloW

@Tozzi @mrhyde The script does actually support that; however the firmware unfortunately still doesn't, AFAIK. Right, there is currently nothing we can do on the server side. Yes, I know there was an issue on https://github.com/universam1/iSpindel about it. Found Issue #96. It just ended in nothing....

McMelloW

I did started with a complete empty database iSpindle. The TCP-Server software is expecting a some records. Perhaps some dummy basic records in a script to fill the new database after it is created. It would be very nice when you change the interval online, without going into the configuratie mode. ...

McMelloW

Ales, thanks very much for all your support.
The link with rest_now.php works OK for me. Finally it all looks OK.

McMelloW

This page does not exist. The Data Table contains no records at all. This is my home page

Switching on an Ispindle does not change any thing. See the log in my previous posting. Data is not written to the Data Table

McMelloW

Not sure where you got this information. aboutt he 'ENABLE_ADDCOLS'. I did not mentione it and I did also not add it to the iSpindle.py. According to Tozzi, it is only for development pruposes. I never used it. I think I switched it on to enter the expert mode. But it is not necessary for that. You...

McMelloW

Based on this log it seems to me that you have set the 'ENABLE_ADDCOLS' to '1' in the settings (GLOBAL-> ADVANCED). Only n this case the iSpindle script trys to add columns to the data table. You need to set this to 0. I never used it. In addition to that you should add a reset to your device and s...

McMelloW

Yes, and you are using obviously a different database since you have the columns 'token' and 'temp_units'. Where do they come from? Are you using also other devices with the iSpindel Database? Dear Alex, After a long search and a reinstall of Mariadb and PHPMyAdmin, I finally found the cause of the...

McMelloW

This what you mean? Yes, and you are using obviously a different database since you have the columns 'token' and 'temp_units'. Where do they come from? Are you using also other devices with the iSpindel Database? This is the original Data Table Structure before the upgrade. Data-Structure-Org.png T...

McMelloW

This what you mean?

McMelloW

This the structure of the Data Table

McMelloW

Happy Brewing, Alex.

This is the structure.

: iSpindle-Structure.png (57.43 KiB) 111433 mal betrachtet

What i can do is delete this database and copy the backup and start over again.

McMelloW

you should start it manually und look what debug tells you. Thanks Alex. I did this and see what happens. pi@mcmellow-pi:~ $ python /usr/local/bin/iSpindle.py waiting for connection... listening on port: 9501 ...connected from: ('192.168.0.92', 38614) waiting for connection... listening on port: 95...

McMelloW

Typically, default configs will be overwritten. The individuals not. You also need to copy the new iSpndle.py script to the bin directory. is the python script running? I guess iSpindle.py is running. I am not sure how to check ispindle-srv is running anyway pi@mcmellow-pi:~ $ sudo service ispindle...

McMelloW

Hi Alex, It looks all great. At this moment, I can not contact the iSpindels with my TCP-Server. Do not see any iSpindels active in the Home page or updates in the Data Table. I guess I have overwritten iSpindle_config.ini & iSpindle_deafault.ini with the update. Are there any other place where ...

McMelloW

Once the strings table is upgraded you need to go into expert settings again and choose 'Upgrade data table' There should be another button under expert settings as long as you have not upgraded the data table. Problem solved. I have use it at full screen, otherwise the upgrade button is on the sam...

McMelloW

Hello Alex, Thank you for the upgrade. This is exact what I was looking for. Today I tried the beta on my Raspberry. Override the whole folder with your code. git fetch --all git reset --hard origin/master After pressing the update button a screen appears with the line: Latest Version installed:2 Th...

McMelloW

Das klingt sehr schön, ich bin neugierig auf das Endergebnis. Viel Glück bei der weiteren Programmierung

McMelloW

JackFrost hat geschrieben: ↑Samstag 22. Februar 2020, 12:29 Ich bestell bald wieder Platinen.
Es geht nur ein Sensor pro Platine.

Es gibt eine Version vom TCP Server auf den die Daten gehen
können.

Gruß JackFrost

Danke für die Information. Sie können mich für eine Platinen aufschreiben.

McMelloW

Dies ist ein sehr interessantes Projekt. Ich habe mit Interesse die verschiedenen Themen zu diesem Thema gelesen. Es scheint schön, ein eManoMeter zu bauen. Eine Reihe von Fragen sind mir in den Sinn gekommen. Kann man irgendwo eine Platine bestellen? Können Sie diesen Sensor auch für eine normale B...

McMelloW

Hello all
Can anyone tell me the status of REMOTECONFIG? The latest messages are from 2018 and I don't see any changes on github.
What values are sent to the iSpindel? It would be very nice to change the interval without getting into the configuration mode.

Thank you in advance for the information

McMelloW

My database contains data from different recipes. Can I also show the graph of one specific recipe. Not yet. I am planning this. But people may use the same recipe name several times. I need to modify the database and may need an additional table for an index and recipe data for each wort. Thanks f...

McMelloW

My database contains data from different recipes. Can I also show the graph of one specific recipe.

McMelloW

Hello,

Is anything known about an English translation? Maybe I can help with this. And possibly also with a translation into Dutch?

McMelloW

Thanks Alex, for your information. At the end it all went very good. One thing wonders me. When you calibrate your iSpindle according the information from Sam and on www.iSpindel.de You start with measuring the horizontal offset by putting your iSpindle on a spirit level horizontal surface. This is ...

McMelloW

Hi, I was mixing up some word from the german diagrams. Extract is basically the gravity calculated from the angle. You should see the bump also there. But as you can see, the angle is going up which will result in a higher calculated gravity than the initial gravity calculated from the first two h...

McMelloW

How does the Angle and extract data look. When the ferentation starts and 'krausen' are forming, the angle might be impacted. And reset should not be used once you started the fermenation as the 'algorythm' for the calculation needs to calculate the initial gravity. Therefore it looks for the last ...

McMelloW

Dear All, At the moment there is a test fermentation of sugar water. In the beginning, before the yeast started to work, I saw a negative ABV and a negative Apperent Attentuation. Can someone explain to me where this comes from. See Graph below. The 'spikes' are start fermentation flags with the res...

McMelloW

Thank you very much Jack for this "Touch of Frost"
Well done.

I will enter this numbers in the calibration table and see what it does.

McMelloW

The Plato values are too large. Where did you converted it ? Seems to be the conversion tool did not use your seperator right. Thanks JackFrost. I used a local beertool on my laptop. Checked them with this online tool http://www.homebrewing.com/calculators/?page=tools&section=plato Some of the ...

McMelloW

Helle Fellow iSpindle builders. Unfortunately, I only have OpenOffice Calc and no Microsoft Excel, the excel sheet does work for me. So I used the online calibration tool. However the results are a bit odd and I do not see any gravity on my graphs Below screenshot of my values in the tool. Calibrati...

McMelloW

Thanks Alex,

Your solution made it easy to change. However the graphs show no gravity. I think there is something wrong with the calibration.

McMelloW

Hello fellow brewers.

Is there a limit to the gravity in the graphs. I made a sugar solution to start following the fermentation. My gravity started with 1.099 - Plato 23.62° But the gravity is not visible in the graphs.

McMelloW

Thank you so much Alex and all others.

Finally it is all working now. Data is coming in the database and also in the CSV file as well. All on my own RPi and local.

At the first sight, all screens look fine in the web browser.

Next step do some test fermenting to see how things workout for that.

McMelloW

Thank you Alex.

Data is coming into the database now and also sending to a CSV file.
Only one issue when I open the web page http://RPi/iSpindle I still receive a blank screen with the message:

Unknown column 'Description_NL' in 'field list'

Where can I filed this field list?

McMelloW

Thanks a lot mrhyde. Hi, I figured out that there was a problem in the sendmail code and fixed it in my latest release (https://github.com/avollkopf/iSpindel-TCP-Server). ,he enablestatus parameter does not work as 'bool' and has to be changed to 'int' within the sendmail script. As mentioned, this ...

McMelloW

Dear vonfritz. If you want there is a ready image for raspberry made by Stephan. Maybe it works better for you: https://www.dropbox.com/s/5s49fk2ku675w19/Raspi-iSpindel-2.0.1.zip?dl=0 or https://cloud.heimbrauconvention.de/s/nsGP8KXAd6NGoT8 Ciao My Raspberry Pi 3B is already up and running with domo...

McMelloW

vonfritz, sorry for my ignorance. But how do I disable sendemail? Check the whole Settings table.

McMelloW

Thank you vonfritz. Your commands and screenshot are different from mine on my RPi. This is my General settings screen. SettingGeneral.png No DENSITYSCALE and SHOWSUMMARY fields on my screen. Your file iSpindle.py is in .... /iSpindel-TCP-Server/iSpindle.py In the INSTALL.md there are the following ...

McMelloW

Hello check your outpath. the folder must exist and at the end of the path you have to add a slash, if not it doesn't work! And only the new data after enabling csv are written in the .csv file. ciao Thank you vonfritz This is the contents of the config_default.ini [GENERAL] DEBUG = 1 HOST = 0.0.0....

McMelloW

Dear Stephan,

Thanks for this addition and all the work and effort you have put in this project. It is a very nice and useful tool in addition to a DIY build iSpindle.

Happy Brewing 2020

Die Suche ergab 60 Treffer