Hallo aus Großbritannien. Würde mir jemand freundlicherweise helfen, mein iSpindel-Problem zu beheben?
Ich habe die neueste 5.6.1 .bin-Datei erfolgreich auf meinen wemos mini hochgeladen und kann den von iSpindel erstellten Zugangspunkt erreichen, um meine Home-Wifi- und Ubidots-Token-Details zu laden. Ich habe das Upload-Intervall von 900 Sekunden auf 20 Sekunden verkürzt. Jedoch wenn ich die Konfiguration speichere und die wemos neu startet, sehe ich das Gerät in meinem ubidots Konto nicht.
Jede Hilfe wäre sehr willkommen.
Grüße
Barry
Hi from the UK. Would someone kindly help me troubleshoot my iSpindel problem?
I have succesfully uploaded the latest 5.6.1 .bin file to my wemos mini and i am able to reach the access point created by iSpindel to load my home wifi and ubidots token details. I have chnaged the upload interval from 900 seconds to 20 seconds. However when i save the configuration and the wemos restarts i do not see the device in my ubidots account.
Any help would be much appreciated.
Regards
Barry
Ubidots Hilfe
- DerDerDasBierBraut
- Posting Freak
- Beiträge: 7890
- Registriert: Donnerstag 2. Juni 2016, 20:51
- Wohnort: Neustadt-Glewe
Re: Ubidots Hilfe
Hi Barry, please get a trace from your iSpindel and post the results here. Include the save-process and the first reboot after saving.
https://youtu.be/6xDW5GbIbUw
(Make sure, that your Ubidots token and the WiFi creadentials are undistinguished in the post.)
https://youtu.be/6xDW5GbIbUw
(Make sure, that your Ubidots token and the WiFi creadentials are undistinguished in the post.)
"Da braut sich was zusammen ... "
"Oh, Bier ;-) !"
"Nein! Was Böses!"
"Alkoholfreies Bier??? ..."
-----------
Viele Grüße
Jens
"Oh, Bier ;-) !"
"Nein! Was Böses!"
"Alkoholfreies Bier??? ..."
-----------
Viele Grüße
Jens
Re: Ubidots Hilfe
Danke Jens für die schnelle Antwort.
Unten ist die Ausgabe von Putty. Es wird vorgeschlagen, dass die Einstellungen, die ich betrete, nicht gespeichert werden, glaube ich?
Ich gebe die Informationen aus dem Portalfenster korrekt ein und drücke Speichern ... Gibt es etwas, das ich falsch mache?
Grüße
Barry
Thanks Jens for the quick reply.
Below is the output from putty. Its is suggesting that the settings i am entering are not being saved i believe?
I am entering the information from the portal window correctly and pressing save......Is there something i am doing incorrectly?
Regards
Barry
FW 5.6.1
2.1.0(deb1901)
Worker run!
Boot-Mode: 5
mounting FS... mounted!
reading config file
opened config file
parsed json
applying offsets
parsed config:
{"Name":" iSpindel000","Token":"","Sleep":900,"Server":"","API":0,"Port":80,"URL":"","Vfac t":191.8,"SSID":"","PSK":"","POLY":"-0.00031*tilt^2+0.557*tilt-14.054","aX":-470 4,"aY":-689,"aZ":1605}...........
ERROR no Wifi credentials
going to Config Mode
ER ROR: OW DISCONNECTED
ERROR: OW DISCONNECTED
*WM: Scan done
*WM: Adding parameter
*WM: name
*WM: Adding parameter
*WM: sleep
*WM: Adding parameter
*WM: vfact
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM: selAPI
*WM: Adding parameter
*WM: token
*WM: Adding parameter
*WM: server
*WM: Adding parameter
*WM: port
*WM: Adding parameter
*WM: url
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM: POLYN
started Portal
*WM: SET AP
*WM:
*WM: Configuring access point...
*WM: iSpindel
*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
ERROR: OW DISCONNECTED
ERROR: OW DISCONNECTED
Unten ist die Ausgabe von Putty. Es wird vorgeschlagen, dass die Einstellungen, die ich betrete, nicht gespeichert werden, glaube ich?
Ich gebe die Informationen aus dem Portalfenster korrekt ein und drücke Speichern ... Gibt es etwas, das ich falsch mache?
Grüße
Barry
Thanks Jens for the quick reply.
Below is the output from putty. Its is suggesting that the settings i am entering are not being saved i believe?
I am entering the information from the portal window correctly and pressing save......Is there something i am doing incorrectly?
Regards
Barry
FW 5.6.1
2.1.0(deb1901)
Worker run!
Boot-Mode: 5
mounting FS... mounted!
reading config file
opened config file
parsed json
applying offsets
parsed config:
{"Name":" iSpindel000","Token":"","Sleep":900,"Server":"","API":0,"Port":80,"URL":"","Vfac t":191.8,"SSID":"","PSK":"","POLY":"-0.00031*tilt^2+0.557*tilt-14.054","aX":-470 4,"aY":-689,"aZ":1605}...........
ERROR no Wifi credentials
going to Config Mode
ER ROR: OW DISCONNECTED
ERROR: OW DISCONNECTED
*WM: Scan done
*WM: Adding parameter
*WM: name
*WM: Adding parameter
*WM: sleep
*WM: Adding parameter
*WM: vfact
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM: selAPI
*WM: Adding parameter
*WM: token
*WM: Adding parameter
*WM: server
*WM: Adding parameter
*WM: port
*WM: Adding parameter
*WM: url
*WM: Adding parameter
*WM:
*WM: Adding parameter
*WM: POLYN
started Portal
*WM: SET AP
*WM:
*WM: Configuring access point...
*WM: iSpindel
*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
ERROR: OW DISCONNECTED
ERROR: OW DISCONNECTED
- DerDerDasBierBraut
- Posting Freak
- Beiträge: 7890
- Registriert: Donnerstag 2. Juni 2016, 20:51
- Wohnort: Neustadt-Glewe
Re: Ubidots Hilfe
Your iSpindel runs into an exception because the DS18B20 is broken or isn't soldered properly.
"OW Disconnected" means, that the temperature sensor initialization has been failed.
"OW Disconnected" means, that the temperature sensor initialization has been failed.
"Da braut sich was zusammen ... "
"Oh, Bier ;-) !"
"Nein! Was Böses!"
"Alkoholfreies Bier??? ..."
-----------
Viele Grüße
Jens
"Oh, Bier ;-) !"
"Nein! Was Böses!"
"Alkoholfreies Bier??? ..."
-----------
Viele Grüße
Jens
Re: Ubidots Hilfe
Vielen Dank Jens für Ihre Hilfe. Nach der Überprüfung der Verkabelung kann ich das Gerät nun in Ubidots sehen.
Freundliche Grüße
Barry
Thank you so much Jens for your assistance. After checking the wiring i am now able to see the device in Ubidots.
Best Regards
Barry
Freundliche Grüße
Barry
Thank you so much Jens for your assistance. After checking the wiring i am now able to see the device in Ubidots.
Best Regards
Barry